Saturday, February 27, 2016
Evacuation Center / Covered Court
One of my project wherein I and Engr. Ray Ramilo worked together and hand in hand for the Structural Analysis and Design Calculation, preliminary design, final design. We are the contractor of this 22meter span x 33meter, using 10mmx4"x4" Angle Bars, 3mmx2"x8" C Shape Purlins... These STEEL TRUSSES was designed to withstand 280-300 KPH wind speed. TYPHOON NONA with WIND SPEED OF 280-320 KPH that hit Northern Samar on December 14, 2015 didn't destroy the roof framing and roofing while some structures in Northern Samar were severely destroyed, some partially damaged..
Thursday, November 19, 2015
Northern Samar Gov. Jose Ong: We are not preventing anyone from running ...
Bawal ang Pasaway kay Mareng Wennie
Northern Samar Gov. Ong, ipinaliwanag ang kaniyang 2014 SALN | Bawal ang Pasaway kay Mareng Wennie...
My Fellow Nortehanon you may listen the interview of Mareng Wennie of the Governor of Northern Samar Jose Ong.
Sunday, January 25, 2015
Deflection Control as per American Concrete Institute -ACI 435-1995
1. Deflection Control provision as per ACI 435-1995- Reinforced Concrete One-way Flexural Members.
2. Deflection of Two-Way Slab Systems;
a. Minimum thickness requirements; as per section 9.5 of ACI 318, is shown in Table 4.2, are based on experience gained over many years.
 |
| Table 2.2 -ACI 435-1978 |
 |
| Table 2-4 -ACI 435-1978 |
 |
| Table 2-5 -ACI 318-1989 |
a. Minimum thickness requirements; as per section 9.5 of ACI 318, is shown in Table 4.2, are based on experience gained over many years.
 |
| Table 4.2 Maximum Permissible computed deflection |
Saturday, December 13, 2014
Friday, November 7, 2014
History of Structural Steel, Design and Construction
I will post about this topic soon..based on research, studies, reading of numerous books authored by Professor Charles G. Salmon, P.E., PhD., Professor William Segui, P.E., PhD., Professor Jack C. McCormac, P.E., PhD., Venancio I. Besavilla, C.E. Master in Management Engineering author of books, Philippines, daniel T. Li-Structural Engineer State of California, USA.
 |
| Industrial Arch Truss -Railway Station |
 |
| Steel Construction Manual |
 |
| Steel Column -Tube and Pipes by Daniel T. Li-Structural Engineer, USA |
 |
| Steel Purlin by Daniel T. Li-Structural Engineer-California, USA |
 |
| Steel Purlin Design -I developed this for my Design |
 |
| Steel Angle Bars |
 |
| Double Angle Capacity |
 |
| Steel Truss using AISC 13th edition specifications |
Friday, October 31, 2014
Philippine Construction and Design Magazine Issue No. 15
Philippine Construction and Design Magazine Issue No. 15
Link : Philippine Construction and Design No. 15
Link : Philippine Construction and Design No. 15
Subscribe to:
Posts (Atom)